|
Four
Pass Fin Design:
The gases leaving the furnace are split four
ways and travel through four individual serpentine passages
to the stack outlet, thus transferring heat evenly to the
fins and boiler shell, eliminating metal stress.
Steam Storage:
Large steam storage, this helps handle swing
and spike loads resulting in quick recovery-response, reducing
carry over of unevaporated water. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Burner:
Only Brand name burners are used Burner is
mounted eye height eliminating use of step ladders or having
to bend or sit on the floor to work on the burner.
Reliability:
Furnace is water cooled, eliminating problems
with refractory breakdown, unlike other vertical boiler units
of similar design. |
|
|
|
|
|
|
|
|
|
|
Turbulent
Flame:
The flame is forced down with the fire whirling and spinning
against its natural flow, this enhances recirculation, mixing
and heat transfer, driving more energy into the water for
greater fuel-to steam efficiency.
Inspection:
Water side inspection openings are located in the most effective
positions. The lower |
|
|
|
handholds
offer far better access for both cleanout and inspection.
Positioning cleanouts in more functional locations avoids,
obstruction and tunneling, also the top handhole offers strategic
viewing of the furnace crown sheet.
Durability:
Our design does not allow the fire to pass under the bottom
mud ring, eliminating the blistering that occurs with other
designs. This will allow the cooler gases to be located at
the bottom of vessel where the scale is most likely to occur,
eliminating baking of the scale.
Installation:
All vertical boiler units are skid mounted, pre-piped and
wired ready for field installation, this allows a more efficient,
space saving layout. |
|
|
|
|
|
Service:
Access both top and bottom to fire side fins, also opening
above feedwater inlet foe easy cleaning. Completely engineered
with the owner in mind, no heavy doors or covers or complicated
service procedures.
Safety:
All electrical components are located away from the floor,
this prevents the possibility of electrical components being
damaged by washdown water or dangerous electrical shorts.
|
|
|
|
|
|
|
|
|
|
|
|
|
9.5hp
Turbo Fire LowNox
- 9.5 HP
- Less than 30 ppm
- Meets California Standards (SCAQMD) for emissions
& boiler operator exempt code
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All Boilers are built
in accordance to ASME Section 1 of the High Pressure Boiler
Code, and Inspected by Hartford Insurance, CO. (CSD 1 Approved)
Options Available:
Most vertical boiler units are available in a complete package,
that includes a compact boiler-mounted feed-water system,
blowdown separator, pre-piped, wired ready to fire. |
|
|
