|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FEED WATER SYSTEMS
Sizes 30 to 1,000 gallons (Larger Sizes on Request)
For all types of steam boilers with pressures to 300 psig.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The following trim shall
be factory installed on each system:
|
|
|
|
|
|
|
|
|
- Automatic, internal float actuated fresh water make-up valve
assembly.
- Water gauge glass set with bronze shutoff cocks and drain.
- Tank drain valve, brass gate.
- BI-metallic water thermometer.
- Pump suction piping with shutoff valve and strainer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TYPICAL OPTIONAL EQUIPMENT:
- Control panel with motor starters & breakers.
- Pump function lights, selector switches.
- Diffuser tube for extra high temperature condensate return .
- High and low water level alarms.
- Pump alternator switches.
- ASME code construction.
- Magnesium corrosion rod.
- Epoxy lining Manhole openings (200 gallon & larger).
- Electric solenoid valve make-up water assembly. Steam operated
feedwater preheater.
- Discharge pressure gauges.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The CRG
Feedwater system's Automatic Return System provides storage for water
make-up and return condensate from the system loop. The system consists
of an elevated tank mounted on a heavy duty steel stand providing
the proper feet of head for selected pumps.
When equipped with optional trim, the Feedwater system provides
a quality, heavy duty packaged unit fully assembled and ready to
install. These units are factory assembled with pre-wired control
panel, and fully piped pumps along with all the neccessary fittings
and valves. Consider the optional automatic steam preheater. When
incorporated into the system, feedwater temperature can be maintained
at 210 °F. At this high temperature, oxygen and carbon dioxide
are released, reducing corrosion problems in the boiler and piping
system. Systems are available in single, dual, triple and quad pump
configurations and custom orders are welcome.
|
|
|
|
|
|
Feedwater Specifications
(all dimensions are in inches)
|
|
|
|
|
|
| BOILER HP |
TANK CAPACITY (GAL.) |
(A) LENGTH |
(B) WIDTH |
* (C) HEIGHT
15-150 PS |
*(C) HEIGHT
200-250 PSI |
*(C) HEIGHT 300 PSI |
**(D) WATER SUPPLY |
(E) COND. RETURN |
(F) VENT |
(G) OVER FLOW |
(H) DRAIN |
SHIPPING WIEGHT 150 PSI |
| 15-30 |
30 |
30 |
19 |
60 |
68 |
69 |
1/2 |
2 |
2 |
1 1/2 |
3/4 |
550 |
| 40-60 |
60 |
36 |
25 |
67 |
73 |
86 |
1/2 |
2 |
1 1/2 |
1 1/4 |
3/4 |
650 |
| 70-80 |
80 |
46 |
29 |
67 |
75 |
86 |
1/2 |
2 |
1 1/2 |
1 1/4 |
3/4 |
700 |
| 100 |
100 |
48 |
26 |
74 |
76 |
87 |
3/4 |
2 |
1 1/2 |
1 1/4 |
3/4 |
825 |
| 125-150 |
150 |
48 |
31 |
79 |
90 |
93 |
3/4 |
2 |
1 1/2 |
2 |
1 |
1100 |
| 200 |
200 |
60 |
34 |
88 |
93 |
96 |
3/4 |
2 1/2 |
1 1/2 |
2 |
1 |
1250 |
| 250 |
250 |
72 |
35 |
89 |
93 |
96 |
3/4 |
2 1/2 |
1 1/2 |
2 |
1 |
1400 |
| 300 |
300 |
72 |
38 |
92 |
96 |
99 |
3/4 |
2 1/2 |
2 |
2 |
1 |
1730 |
| 350 |
350 |
84 |
38 |
92 |
96 |
99 |
3/4 |
2 1/2 |
2 1/2 |
2 |
1 |
1835 |
| 400 |
400 |
72 |
44 |
98 |
102 |
114 |
3/4 |
3 |
2 1/2 |
2 |
1 1/4 |
2050 |
| 500 |
500 |
84 |
44 |
104 |
110 |
114 |
3/4 |
3 |
2 1/2 |
2 |
1 1/4 |
2300 |
| 600 |
600 |
84 |
48 |
108 |
114 |
118 |
3/4 |
3 |
2 1/2 |
2 |
1 1/4 |
2450 |
| 700-800 |
800 |
114 |
48 |
120 |
118 |
125 |
3/4 |
3 |
2 1/2 |
2 |
1 1/4 |
2940 |
| 900-1000 |
100 |
96 |
58 |
130 |
135 |
135 |
(2) 3/4 |
3 |
3 |
3 |
1 1/2 |
4200 |
|
|
|
* Overall height may change, depending on NPSH
requirements of the pumps selected.
** Customer incoming supply pressure to be less than 40 psi
*** Consult factory.
NOTE: 30 gallon tank has single vent.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD PUMP CONFIGURATION
|
|
|
|
|
|
|
| BOILER HP |
15 PSIPUMP# |
15 PSIHP. |
150 PSIPUMP# |
150 PSIHP. |
200 PSIPUMP# |
200 PSIHP. |
***250 PSIPUMP# |
***250 PSIHP. |
***300 PSIPUMP# |
***300 PSIHP. |
| 15-30 |
CR2-20/1U |
1/2 |
CR2-100U |
3 |
CR2-120U |
3 |
CR2-150U |
5 |
CR2-180U |
5 |
| 40-60 |
CR2-20U |
1/2 |
CR2-100U |
3 |
CR2-120U |
3 |
CR2-150U |
5 |
CR2-180U |
5 |
| 70-80 |
CR2-20U |
1/2 |
CR2-100U |
3 |
CR2-150U |
5 |
CR2-180U |
5 |
CR8-140U |
15 |
| 100 |
CR4-20U |
3/4 |
CR4-100U |
5 |
CR2-150U |
5 |
CR2-180U |
5 |
CR8-140U |
15 |
| 125-150 |
CR4-20U |
3/4 |
CR4-100U |
5 |
CR4-120U |
5 |
CR8-120U |
10 |
CR8-140U |
15 |
| 200 |
CR4-20U |
3/4 |
CR4-100U |
5 |
CR4-160/14U |
5 |
CR8-140U |
15 |
CR8-160U |
15 |
| 250 |
CR4-20U |
3/4 |
CR4-120U |
5 |
CR4-160/14U |
5 |
CR8-140U |
15 |
CR8-160U |
15 |
| 300 |
CR4-20U |
3/4 |
CR8-100U |
7 1/2 |
CR8-120U |
10 |
CR8-140U |
15 |
CR8-160U |
15 |
| 350 |
CR8-20U |
1 1/2 |
CR8-100U |
7 1/2 |
CR8-120U |
10 |
CR8-140U |
15 |
CR8-160U |
15 |
| 400 |
CR8-20U |
1 1/2 |
CR8-100U |
7 1/2 |
CR8-120U |
10 |
CR8-140U |
20 |
CR16-120U |
25 |
| 500 |
CR8-20U |
1 1/2 |
CR16-60U |
15 |
CR8-140U |
15 |
CR16-100U |
20 |
CR16-120U |
25 |
| 600 |
CR8-30U |
3 |
CR16-80U |
15 |
CR16-80U |
15 |
CR16-100U |
20 |
CR16-120U |
25 |
| 700-800 |
CR32-1-1 |
3 |
CR16-80U |
15 |
CR16-100U |
20 |
CR16-120U |
25 |
CR32-9 |
40 |
| 900-1000 |
CR32-1-1 |
3 |
CR32-5 |
20 |
CR32-7 |
30 |
CR32-8 |
30 |
CR32-9 |
40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*** DIMENSIONS SUBJECT TO CHANGE
WITHOUT NOTICE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copyright © CRG Boiler Systems a
Div. of C.R.G. Electric, Inc 2002
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|